| Display: |
5 digits ( 0 to 99999 ) LCD display. |
| Flash adjust Range: |
60 to 32,000 RPM/FPM.
* RPM : round per minute.
* FPM : flash per minute.
|
| Resolution: |
0.1 RPM :
< 1,000 RPM.
1 RPM :
≧ 1,000 RPM |
| Function Buttons: |
Digital rotate knob,
x 2 button, ÷ 2 button,
+ button, - button, |
| Accuracy: |
± (0.05 % + 1d)
Spec. tested under the environment\
RF Field Strength less than 3 V/M &
frequency less than the 30 MHz only. |
| Power Supply: |
110 Vac ± 10%, 50/60 Hz.
or
220 Vac ± 10%, 50/60 Hz.
or
230 Vac ± 10%, 50/60 Hz.
* A " Voltage rating label "
is affixed under the bottom
case to show the voltage
rating of power supply.
When use the stroboscope,
make sure to identify the
power supply voltage
exactly. |
| Circuit: |
*Microcomputer LSI circuit & crystal control time base. Digital synthesis circuit for the signal adjusting. |
| Signal Stability: |
The signal adjusting circuit is used the digital synthesis circuit, the output signal will existing high sta |
| Power Supply: |
AC( 100V to 240V ) to DC 9V ( 3A ) adapter, incuded. Build in battery compartment, power can be used the optional DC 1.2 V Ni-MH recharge battery ( UM-1, D size ) x 4 PCs. |
| Power Consumption: |
DC 2.4 A ( 3600 FPM ) |
| Operating Temp: |
0 to 50 ℃ (32 to 122 ). |
| Operating Humidity: |
Less than 80% R.H. |
| Dimension: |
21 x 12 x 12 cm (8.3 x 4.8 x 4.8 inch). |
| Weight: |
1Kg/2.2 LB. |
| Housing: |
Compact and impact plastic injection
case with plastic mirror type reflector. |
| Calibration: |
Crystal time base and microprocessor circuit, don't necessary take any external calibration process. |
| Accessories Included: |
Operation manual...........................1 PC. AC( 100V to 240V ) to
DC 9V adapter .....................................................1 PC. |
| Optional Accessor: |
Flash Xenon tube....Model : TBXE-2289 DC 1.2 V Ni-MH recharge batteries, UM-1/D size ( BAUM-1) x 4 PCs.
DC 1.2 V Ni-MH batteries charger with AC adapter, complete set.
Model: BACH-110 ( AC 110V power )
Model: BACH-220 ( AC 230V power ) |
| Flash tube: |
Xenon lamp. |
| Flash Duration: |
Approximately 60 to 1,000 microseconds. |
| Flash color Temp: |
Xenon white 6,500 K degree. |
| Flash energy: |
4 Watts-seconds (joules). |
| Beam Angle: |
80 degrees. |
Flash tube
replacement:
|
It is required to change the flash tube
when the instrument start to flash
irregularly at speeds > 3600 RPM/FPM.
|
Operating duty
Cycle:
|
For prolong life and safety, please
adhere to the following operation duty
cycle: < 2000 RPM - 2 hours
2001 to 3600 RPM - one hour
3601 to 8000 RPM - 30 minutes
> 8000 RPM - 10 minutes.
* 10 min. cooling off period between cycles.
|
|
